Welcome to autodiag-tech DownloadSite MapContact Us
ShenZhen Autodiag Technology Co., Ltd AUTODIAG TECHNOLOGY

SINCE 2004--Professional Auto Diagnostic Factory

+86-755-29055709
prevnext

2021 Hot-selling X-PROG Box ECU Programmer XPROG-M V5.50

  • Details

  • Contact Us

2014 Hot-selling X-PROG Box ECU Programmer XPROG-M V5.50


The XPROG-box project is a continuation of the project XPROG and now supports more than 450 units (serial EEPROM's, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).

Notice for Xprog-box software version 5.50

Please use our CD software in the package only!!!! If you use other version software (lower or higher) or try to update the software or hardware, the hardware will be damaged, and lose its warranty. 

Operating system:  Only 64-bit Microsoft Windows XP, Only 64-bit Microsoft Windows 7

Language: English only


Introduction:

The XPROG-box project is a continuation of the project XPROG and now supports  more  than  450 units (serial EEPROM's, Microcontrollers (MCU),   Electronics Control Units (ECU),  DashBoards, Immobilizers, Calculators and others). 


Package list:

XPROG-box hardware (Aluminum enclosure) .

Basic software authorizations and programming adapters set, total 19pcs

USB Cable.

USB dongle

CD with XPROG-box software (V5.50)


Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P


Adapters:

Product Code Description

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash


System requirements:

Processor:  INTEL Pentium 60MHz or faster (depends on operating system)

Memory (RAM):  64MB (depends on operating system)

Hard drive: 20MB free space

Communication:  One free physical COM or USB port

 

Attention for xprog-box 5.50

1. Close all of the computer anti-software. If not, X-prog software may be killed.

2. Disconnect the internet. If not, the internet may damage the hardware.

3. Uninstall all the old xprog-m, or xprog box software, make sure that your PC only install our software for our xprog-box 5.50 , our xprog-box hardware cannot work with other lower or higher software. If not, the hardware will be damaged, and will lose its warranty...

4. Never try to UPDATE, the hardware will be damaged if you want to try to upgrade it online, without any warranty.

5. We cannot refund, cannot exchange, can not repair if you do not listen to those advices. It means that you accept those conditions if you have ordered our xprog-box.

 

Software Display:


  ◆   Company Strength


→  Paul-USA



Paul has work with Our Company for 10 years,He is not only our business partner but also very good friend of our boss,honestly,he said he has quite a few choice for suppliers,but work so many years with us not only our products are good quality,service is nice...




→  Van Dijk-Netherland


We have do business together for years,When Autodiag come to Germany for exhibition,i went to meet them,Carl is a very nice and honest person,do business with them is happy,wish a long cooperation with them!...




Julio -- Spain


Autodiag is the best supplier in china,before i found them,i already in this business for years,honestly,compare to Autodiag,all other company is crap.




Vladimir Chuvakin -- Russia


Before we are not sure business with Autodiag,After we see their factory,we want to business with them and want to more in future!


 


 ◆   About Autodiag



ShenZhen Autodiag Technology Co., Ltd  was established in 2004,Specialized in Auto diagnostic Products more than 10 years.


Our factory is SGS certificated factory with 200 employees , we have a 8 professional technicians R&D Team which is rare in the whole industry, the workshop occupy an area of 5000 square meters, the annual production output was more than 1 million items which 30% are new products. we have our own brand V-Checker and we are able to do OEM or ODM. More importantly, We have very strict quality control system. From very strict factory QE Process to Authority products certificate, SGS,CE, ROHS and UL Tests, Meanwhile, We have very good cooperation with Launch, Autel and YanHua ,we are authorized dealer of these brands.



We have 10 years successful foreign trading experience ,have build good partnership with clients from 35 different countries, Now we have official distributors in Poland, Germany, Spain, France, UK ,Argentina and New Zealand ,Clients come to visit every month and we have been to different countries to hold exhibition, Such as Automechanika 2012&2014 in Frankfurt, and now we are preparing for the next AAPEX Show in Las Vegas.

Reliable quality products, best price, professional technician& customer service, ability to develop new products, fast and safe delivery, Life long products warranty make us best diagnostic tools factory in Shenzhen ,and our goal is be the BEST auto diagnostic factory in china, Be clients’ best supplier in the world!






Enquiry:2021 Hot-selling X-PROG Box ECU Programmer XPROG-M V5.50

Hot Products
Popular Articles
+86-0755-29055709

Company address:9005-9008 YouSong Business Plaza,LongHua,ShenZhen,China.