SINCE 2004--Professional Auto Diagnostic Factory

How to use MB SD Connect C4 with Mercedes vediamo 

OBD Diganostic Scanner:MB SD Connect C4 with new mercedes vediamo 5.05 software can do mercedes scn offine programming. Mercedes vediamo scn coding software can work with 2016.9 mercedes benz xentry software. Below OBD2Tuning.com sharing How to use MB SD Connect C4 with Mercedes vediamo scn coding Erase Mercedes W204 EIS History KM. 

At the beginning, i made some tests with 204 EIS, i renew it and now actual km stand is 0 km; but with tester, AVDI or Vediamo result is like this: 

20:55:29 Service EIS_204: DT_Km_Info_Aktueller_Km_Stand. Result: 0 km

20:55:31 Service EIS_204: DT_Km_Info_Letzter_Km_Stand. Result: 77050 km

20:55:38 Service EIS_204: DT_Km_Info_Vorletzter_Km_Stand. Result: 76538 km

So i wanna erase the 2 results.

Tried to learn dash to EIS, but failed!

dash and sam are from scrap yard from one car, and EIS is from another car.

I try to adapt used dash to EIS with FVDI but failed to syncrhonize…

in this moment vin in eis is yyyyyyyyyyyyyyyy.

i always trying to make all 0 km

seems not to work,

Started a topic in the forum, and got “The easiest way to adapt an used Dash is to make the KM reading 0 in the dash and then adapt it in the car either with DAS or Vediamo or AVDI.”

Then i made dash 1000 km,

then first value (last mileage value) has changed in EIS,

then i made 2500 km in dash,

and second value has changed to 0 km

now i have current value 2496 km

Last mileage value 992 km

and Second last value 0 km

experiment done successfully!

More from skype:autodiag.tech

More from Other Product:www.obdiifactory.com